Air Equipments And Spares

The meter is a temperature and humidity measuring instrument. It is normally used to measure the humidity & temperature in Offices, Storerooms, Buildings & Greenhouses.

• Portable digital Thermo - Anemometer
• Simultaneously display of both temperature and wind speed.
• 4 Digit LCD Backlight Display.
•  MAX - HOLD function
• Highly accurate NTC Sensor
• Measurement Units : knots, mph, Km/h, m/s, ft/min.
• Moving 2 / 16 second average with MIN / MAX / AVERAGE
• Memory of maximum, minimum and average record for both temperature & wind speed
• Air velocity average reading upto 8 multiple points.
• Auto power off function
• 2 meters coiled cable and mounting nut (1/4” x 20) for long extension.
• Fan diameter 75mm

Features :
• Use the high - performance acceleration meter, realize the repetitiveness and accurate measurement.
Bearing condition monitoring function.
• LCD digital display.
• Lightweight and easy to use
• Wide frequency range (10Hz ~10kHz) in acceleration mode.
• AC output socket for headphones and recording.
• Optional head phones for use as electronic stethoscope.
    Can communicate with PC computer for statistics and printing by the optional cable and
   the software for RS232C interface

General Specifications :
• Display : 4 digits, 18 mm LCD
• Transducer : Piezoelectric accelerometer
• Parameters measured : Velocity, Acceleration, and Displacement RPM and Frequency

• Measuring range :
  Velocity : 0.01- 400.0 mm/s true RMS 0.000-16.00 inch/s
  Acceleration : 0.1- 400.0m/s² equivalent peak 0.3 - 1312 ft/s²
  Displacement : 0.001 - 4.000mm; 0.04 - 160.0 mil, equivalent pk-pk
  RPM (r/min) : 60 - 99,990 r / min
  Readings should be multiplied by 10 if the display show ''10''.
  Frequency : 1 - 20 kHz

• Frequency range for measuring :
  Acceleration :10Hz ~ 1kHz In ''1'' mode;
  10Hz ~ 10kHz In ''10'' mode for bearing condition check.
  Velocity : 10Hz to 1kHz
  Displacement : 10Hz to 1kHz

• Accuracy : ± 5% rdg + 2 digits
• PC interface : RS232C
• Output : AC output 2.0V peak full scale (load resistance : above 10k)
• Power supply : 4 x 1.5 AAA size (UM-4) batteries
• Operating Temperature & Humidity : 0-40°C; below 90% RH
• Dimensions : 124 x 62 x 30 mm
• Weight : Approx.120g (without batteries)

• 6-digit backlight display reads the data clearly
• Signal detection reminder avoids invalid detection actions
• Maximum/minimum/average value and final readings
• Setting/Turning off the automatic power-off function
• Small size and easy to hold
• 1-year warranty

• I-V Curve Test for Solar Panel / Module / Cell
• Max. Solar Cell/Module Power / Cell Power(Pmax) search by Auto-Scan
• Capability: 60V, 12A
• Best Resolution: 1mV , 1mA
• Manual Single Point I-V Test
• Max. Voltage (Vmaxp) at Pmax
• Max. Current (Imaxp) at Pmax
• Voltage at Open Circuit (Vopen)
• Current at Short Circuit (Ishort)
• I-V Curve with Cursor to Display each Data Point
• Efficiency (%) Calculation of Solar Panel
• Real Time data logging
• RS232C (to USB Bridge) Cable for PC
• Communicate with PC via USB Cable
• AC Adaptor and Rechargable Lithium Battery
• Memory Size : 100 Records
• Sampling Time of Data logging : 0 ~ 99 min
• Large LCD with Backlight

This instrument is a portable 3½ digit, compact - sized Digital Thermometer designed to use external K-type thermocouple as temperature sensor. Temperature indication follows National Bureau of Standards and IEC 584 temperature / voltage tables for K - type thermocouple. RTD Thermometer is mainly using for monitoring high-precision temperature and measuring scopes. The thermometer can display changes among the three units : Kelvin, Fahrenheit and Centigrade, and it also has memory, reading the MAX and MIN values function.

• KM 926 designed according to the IEC 651 TYPE 2 & ANSI
  S1.4 TYPE 2 for sound level meter.
• Instantaneous sound measure function.
• Measurement Range : 30 ~ 130decibel
• With two equivalent weighed sound pressure levels, A & C.
• Fast & Slow dynamic characteristic modes.
• AC & DC signed output for frequency analyzer level recorder, 
• FFT analyzer, graphic recorder etc.

• A/C Frequency weighting selection
• Automatic Backlight
• Auto Power off 10 minutes
• PWM signal output
• Calendar function
• 4700 data record function

• Portable digital Thermo - Anemometer
• Simultaneously display of both temperature and wind speed.
• 4 Digit LCD Backlight Display.
• MAX - HOLD function.
• Highly accurate NTC Sensor
• Measurement Units : knots, mph, Km/h, m/s, ft/min.
• Moving 2 / 16 second average with MIN / MAX / AVERAGE
• Memory of maximum, minimum and average record for both temperature & wind speed
• Air velocity average reading upto 8 multiple points.
• Auto power off function
• 2 meters coiled cable and mounting nut (1/4” x 20) for long extension.
• Fan diameter 75mm.

Compact, rugged and easy to use, Just aim and push the button, it reads current surface temperatures in less than a second. Safely measure surface temperatures of hot, hazardous or hard-to-reach objects without contact.

Special Features:

• Simple one-handed operation.
• Laser Targeting
• LCD with backlight for operation under poor illumination
• °C / °F select switch.
• Laser ON / OFF switch.
• Automatic Power Off.
• Display Hold Function.

• High / Low Temperature Alarm Setup
• Two Laser Target Pointer Selection.
• Max / Min / Avg / Dif Temperature Measurement
• °C / °F select switch.
• Backlight display selection
• Data Hold Function
• Auto Power Off.
• Low Battery Indication