Air Equipments And Spares

• It can quickly test Ethernet 10Bose-T(TP/STP), AT & T258A, EIA/TIA 568A/B, 8-Position Token Ring, and USOC4/6/8 modular cable.
• It does automatic test for open Circuits, Shorts, miswires, reversals.
• It’s main unit and remote unit allow One Person Testing.
• Size is 115(L) x 95(W) x 28(H)mm.
•  It requires DC 9V battery.
• Accessories : Carring Case, Test Leads, manual,

• AC current measurements up to 400 A, handling your everyday electrical maintenance needs
• Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
• Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

• Visually displays measurement value & state
• Acceleration, Velocity and displacement measurement
• Different vibration frequency selection
• High sensitivity probe for accurate measurement
• Provides long and short probe head, each one is suitable for different situation measurement.
• Equipped with AC signal output interface
• Low power indication function
• Auto power-off
• Backlight LCD display
• Simple to use, the structure is compact, portable for carrying along with measurement.

• Use the high - performance acceleration meter, realize the repetitiveness and accurate measurement.
• Bearing condition monitoring function
• LCD digital display.
• Lightweight and easy to use
• Wide frequency range (10Hz ~10kHz) in acceleration mode.
• AC output socket for headphones and recording.
• Optional head phones for use as electronic stethoscope.

• Unique 40A high-precision low current measurement--0.01A high-resolution, 1.6% high-precision measurement
• The clamps are slim, lightweight, and portable, making them ideal for use in small, confined spaces
• The large backlight display facilitates readings in dark environments
• Starting current (inrush) functionality (319) allows measurement of the starting current of electrical and lighting equipment, for example. (319)
• Current frequency measurement
• Precision down to 0.01A and 0.1V
• 1000A/600A AC/DC current measurement (319/317)
• 600V AC/DC voltage measurement
• 4000Ω resistance measurement
• Continuity beeper
• Auto off function enhances battery life, meaning the instrument can work when you need it screen store ‘hold’ function for capturing a measurement result on the screen
• One year warranty

• 2 Lines x 16 Characters L.C.D
• Low power consumption
• Microprocessor Controlled
• Menu Driven
• Accurate Digital Readout of Disconnection Time.
• Automatic Data Hold function.
• Zero Crossing Circuitry permit testing at 0° or 180°
• Disconnection Phase Polarity shown on L.C.D. Display
• Auto Power off.
• Polarity Trip Indicater
• Wiring Polarity Indicator
• Measures Voltage & Frequency between Line & Earth before testing

Features :
• Use the high - performance acceleration meter, realize the repetitiveness and accurate measurement.
Bearing condition monitoring function.
• LCD digital display.
• Lightweight and easy to use
• Wide frequency range (10Hz ~10kHz) in acceleration mode.
• AC output socket for headphones and recording.
• Optional head phones for use as electronic stethoscope.
    Can communicate with PC computer for statistics and printing by the optional cable and
   the software for RS232C interface

General Specifications :
• Display : 4 digits, 18 mm LCD
• Transducer : Piezoelectric accelerometer
• Parameters measured : Velocity, Acceleration, and Displacement RPM and Frequency

• Measuring range :
  Velocity : 0.01- 400.0 mm/s true RMS 0.000-16.00 inch/s
  Acceleration : 0.1- 400.0m/s² equivalent peak 0.3 - 1312 ft/s²
  Displacement : 0.001 - 4.000mm; 0.04 - 160.0 mil, equivalent pk-pk
  RPM (r/min) : 60 - 99,990 r / min
  Readings should be multiplied by 10 if the display show ''10''.
  Frequency : 1 - 20 kHz

• Frequency range for measuring :
  Acceleration :10Hz ~ 1kHz In ''1'' mode;
  10Hz ~ 10kHz In ''10'' mode for bearing condition check.
  Velocity : 10Hz to 1kHz
  Displacement : 10Hz to 1kHz

• Accuracy : ± 5% rdg + 2 digits
• PC interface : RS232C
• Output : AC output 2.0V peak full scale (load resistance : above 10k)
• Power supply : 4 x 1.5 AAA size (UM-4) batteries
• Operating Temperature & Humidity : 0-40°C; below 90% RH
• Dimensions : 124 x 62 x 30 mm
• Weight : Approx.120g (without batteries)

• Compact True-rms digital multimeter for field service
• Includes: meter, holster, 4 mm PVC-Insulated test lead
• Easy one-handed operation of the meter
• Min/Max/Average to record signal fluctuations

The intelligent and hand-held ultrasonic thickness gauge is controlled by a microprocessor, which can measure thickness and sound speed of various materials quickly, accurately and without damage by ultrasonic measurement. This instrument is capable of accurate measurement for different materials or parts in industrial production, as well as monitoring pipelines and pressure vessels of production equipment, and corrosion degree of various parts in use. It can also be widely used in manufacturing, metal processing, commodity inspection and other testing areas. Any material that allows ultrasonic to transmit at a constant speed and that is distinguishable from waves reflected from the back side is applicable to this instrument.

Application :
The thickness of any good conductor for ultrasonic waves with top & bottom surfaces parallel to each other, like metal, plastic, ceramic & glass, can be measured with the instrument. For example : aluminum, copper, gold, resin, water, glycerin, etc. The internal particles of cast iron are too big for this instrument!

Electrical Specifications :
• Measuring range : 1.00〜225.0mm
• Data storage : 500
• Operation frequency : 5MHz
• Measurement error : ±(0.5%H+0.05)mm
• Lower limit of pipe measurement : Φ20x3mm (steel)
• Adjustment range of sound speed : 1000〜9999m/s
• Temperature range of operation : 0〜40℃
• Battery : 3 Ni-MH rechargeable batteries of 1.2V
• USB charging : 5V 1A
• Dimensions : 65x146x30mm
• Weight : 130G
• Probe : Measurement parameters

• 6-digit backlight display reads the data clearly
• Signal detection reminder avoids invalid detection actions
• Maximum/minimum/average value and final readings
• Setting/Turning off the automatic power-off function
• Small size and easy to hold
• Easy switching of the contact and non-contact measurement modes
• Different speed measuring heads and rotational speeds adapt to different measurement occasions
• 1-year warranty

• Sound velocity selection : Unit preset 10 kinds materials velocity inside
• Auto calibration to assure the accuracy
• Auto linear compensation : this advanced software program enhances the precision by correcting the non-linear accuracy of transducer
• Use “VEL” key to make a quick select for the sound velocity of 10 kinds in common use materials
• Coupling status indication : observing the coupling icon to learn if the coupling is accomplished or not.
• Low battery indication

• Ultrasonic measures thickness
• Various material (metal/glass/plastics/ pottery and other materials) optional
• Ultrasonic velocity adjustable
• Measuring velocity function
• Thickness unit mm/inch convertible
• Coupling indication.
• Build in a metal piece for calibration
• Low battery voltage indication
• Auto power off

• Basic Accuracy 0.25%
• Max. Test Current : 5A (120mΩ) for 7002
• Max. Test Current : 10A (60mΩ) for 7272
• Manual or Auto Range
• Four Terminal Kelvin Measurement
• 6 Ranges with 1µΩ Best Resolution
• Measurement of Resistive and Inductive Materials
• Setting for HI, LO & PASS Readings
• Memory of 3000 Measurements Data
• Programmable HI-LO Alarm with memory of 20 Data
• Large LCD with Backlight & HOLD Function
• Low Power Consumption
• Battery Operated (Rechargeable Battery)
• Low Battery Indication
• LED indication for Invalid Resistance Measurement
• Cable Length Measurement in feet & meters
• User Interface Software for PC Communication via RS232C (to USB Bridge) Cable
• Built-in Batery Chaging Circuit & Calender Clock

• Measurement of 1 Φ and 3 Φ Transformer / VT / CT Turns Ratio
• VT / PT Ratio 0.8 ~ 2000, Ct Raio 0.8 ~ 2000
• Graphical and Literal Illustration of Measurements and connections with Large Back - Lighted Dot Matrix 240 x 128 LCD
• Displays Turns Ratio, Deviation, Secondary Output, Excitation Voltage and Current, Phase Angle and Nameplate. Transformer VT / CT Values in one page for easy quality interpretation
• Check for Live Test Points, Short Circuit, Open Circuit and Reverse Polarity before each measurement
• Store 4096 Files of Transofrmer Nameplate Values (VT / PT / CT 1 Φ / 3Φ, Test Frequency, Primary and Secondary Voltages or Ratio, RCF) and Measuring Data.
• Ten Test Frquencies (50 ~ 400 Hz)
• 9 Types of 3 Φ Winding Connection pre - installed
• Wireless Blue Tooth Communication with PC
• Select Filter to Remove Field noise (Slow, Normal, Fast)
• Record with Date and Time Stamp
• Powerful Lithium Battery (3400mAH) with built - in Charging Circuit
• User Programmable RCF (Reference Correction Factor, 0.99 ~ 1.01) to Correct Accuracy within 1% Error
• PC Application Software Included
• Friendly File System for Easy On - Site Data Retrieval and Nameplate Values Management

• By electromagnectic method, the meter can measure the coating thickness non-destructively, including paint, spray-plastic, rubber, enamel, or chrome plate, copperizing, aluminum plating on steel, iron, non-austenitic stainless steel.
• Four digitals LCD display, differentiating upto
• System calibrating by user-self.
• Pocket shell, convenient for engineering locale.
• Micro-controller controls, high accuracy.
• Coupling state display
• Shut down manually or automatically.
• Low battery voltage indication.

• Measures coating thickness on Ferrous base materials.
• Portability and simple one hand operation.
• Select the on-line display for one off MAX/MIN/MAX-MIN/AVG function.Fast one point calibration for frequent measuring thickness use.
• 2-point calibration for normal use
• Auto-power off.
• LED Back-light & LCD display Reverse for easy reading.
• Data logging function capacity up to 255 
• Warning beeper triggers by Hi/Lo limit settings. 
• m/mils user-selective. Inch & Metric measurement options.
• Zeroing Plate & Standard Coating Plate
• Attached with carrying strap.

• Measure Distance upto 15m
• Volume Calculation : upto 999.99m ³
• Indoor Recommended use
• Add Calculation upto 99.99m
• Torch / Flashlight
• Low Battery Indication
• Area Calculation upto 999.99 m²
• Laser Target pointer

• 3½ Digit 1999 Count Large LCD Display
• Range Selection & Single Person Push Button Operation
• LCD with Green Backlight Function with Indicator Switch
• Data Holding Function
• Display with Annunciators
• Measurement of AC Voltage upto 600VAC
• Measurement of Phase Sequence Between (Phase - Phase Voltage) with LED Indicators & Beep Facility
• Auto Range (Insulation Test)
• Red LED Indicator for HV (High Voltage)
• Inbuilt Protection Circuit to prevent the harm of reverse Voltages
• Battery Operated with AC Adaptor
• Suitable for Calculating PI & DAR (Manually)
• As per EMC Standard IEC 61326-1 Class B
• Over Voltage CAT III, 600V
• As per Safety Standard IEC/EN 61010-1 & 61010-31
• IP 44 Protection