Air Equipments And Spares

• Microprocessor controlled with advanced safety features.
• AC Voltage - Live Volage Warning
• Test Voltage (DCV) : 0.5 KV/ 1KV / 2.5 KV / 5 KV
• Bar-graph indicates test voltage-rise & decay can be observed during tests.
• Display and sound warning if external voltage is present
• Auto-ranging / Auto Power-off.
• Battery life is extended by "Enersave™" feature. 
• Built-in carrying case. Test leads in separate pouch. 
• Large LCD Show test time duration (up to 99.9s) for Easy Comparison. 
• IEC 1010-1 CAT III 300V
• IEC 1010-1 CAT.III 300V.

• The "KUSAM-MECO" 1152MF has features for Insulation Resistance
  Testing, Polarisation Index measurement & Die electric absorption
  ratio measurement, Voltage (AC-DC) measurements with
  Automatic Hold facility, Continuity Test with a short circuit
  current of Minimum 200mA.
• Two very unique features are found on the Multifunction
  Mode l1152 MF, MOV and Gas Arrester testing.

• Today, most equipments and electrical installations are protected by MOVs and Gas arresters.
• The 1152MF can test these devices to establish if the devices are still operating correctly or not.
• Energy conservation is featured on all these new Advanced Products.
• EnerSave™ limits the test duration to about 10 Seconds to save energy.
• This new generation of test equipments have no moving parts. All calibration are saved internally in a non volatile memory.
• Calibration can be done at any calibration facility around the world, without the need for dedicated calibration equipment.
• This makes these products easier to maintain and lower the cost of Calibration and ownership.
• Their calibration interval can be extended without much problem.
• They comply to all the latest regulations, including UK 16 Edition.
• Meets IEC/EN 61010-1 CAT III 600V.

Features
• Digital EE Calibration (No Potentiometers)
• Automatic Voltmeter AC/DC at Start / Reset.
• Off Push button (press more than 5 sec on 1kV key)
• MOV/protection devices test
• Polarization Index (PI) on 250, 500 and 1000V
• Battery test on 250, 500 and 1000V
• Voltmeter on request by keypad : Automatic
• Auto-Discharge on all Test and all ranges
• Continuity Open Circuit Voltage of 5V DC
• Buzzer ON/OFF by key : Always ON (225mA Typical)
• Test Auto-Stop.
• Nominal Voltage @ 1mA on all insulation Ranges.
• Re-programmable Microprocessor for Easy Updates.
• Insulation Ranges Insulation measurement from 2kΩ (250V range) to 8GΩ (1kV Range)
• Can be calibrated in ALL calibration laboratories
• Continuity from 0.01 Ω (220mA) to 1999Ω
• AC Voltmeter from 1 Vac to 700 Vac
• Smart Hold & stop on Voltmeter AC / DC.
• EnerSave™
• Keypad Operation
• On-Reset / Restart Key
• Auto-Off
• Test ON-OFF
• Dielectric Absorption Ratio (DAR) on 250, 500 and 1000V
• Battery Test at switch ON / Reset
• Safety Voltmeter before each Test
• Continuity short Circuit current >220mA (225mA Typical)
• Nominal Voltage @ 1mA on all Insulation Ranges
• Leads Auto-Null key
• Can be calibrated in ALL calibration laboratories
• DC Votmeter from ± 1VDC to ± 950VDC
• Accept 8 rechargeable Batteries or Alkaline or Normal
• Gas Arrester Function

• Digital MΩ Hitester & Digital multimeter.
• Overlod Protection
• The meter can display actual insulation test voltage.
• LED light is used to indicate high voltage output status
• Measures Insulation Resistance & AC & DC Voltage
• Backlight , function characters indication
• Auto power off
• Avilable Model: KM 370, KM379
• Low battery indication

• Auto Discharge Function on all tests& all ranges.
• Gas Arrester Test
• MOV / Protection Devices Test
• Preselectable Measurement Time : Auto Stop 
•   on completion of Test
• Auto Stop & Hold Function. 
• Ener Save ™
• Can be calibrated in All calibration laboratories
• Buzzer ON/OFF by key : Always ON
• Nominal Voltage @ 1mA on all Insulation Ranges
• Continuity Short Circuit Current >220mA (225mA typical)
• Continuity Open Circuit Voltage of 5V DC
• Smart Hold & Stop on Voltmeter AC / DC
• Test ON/OFF
• Fuse : fast HBC 600V / 500mA

• 3 ½ Digit 15mm LCD Display with Backlight
• High Voltage LED Indication
• Provision for Using Battery Adaptor
• High Accuracy (±3% rdg + 2 dgt)
• 5 Models with various Voltage and MOhm Ranges
• Single Person Push Button Operation
• Designed to Generally confirm to IS 10656 - 1983
• Meets Requirements of IEC 61010, Installation Category II, 1000V Phase - Earth
• Terminal Voltage more than 85% of rated Voltage for Insulation Resistance Measurement from 10% to 100% of the Insulation Resistance Range
• Carrying Case

• Battery Operation
• Logarithmic Scale.
• Anti-parallax mirror scale for accurate readings.
• Power ON / OFF switch Lock for continuous measurement.
• Battery condition indication.
• Sturdy ABS case
• High Voltage (Output) LED Indicator
• Storage Temperature : -10°C-60°C, < 80%R.H.
• Power ON/OFF Switch for continuous measurement
• AC Voltage measurement facility to check for live circuits.
• AC Voltage measurement Accuracy within ±5% of max. Scale value.
• Terminal- to- Terminal Voltage ± 10% of rated Voltage at "0" Megaohms scale.
• About 90% of rated Voltage at Center scale.
• Insulation Resistance Accuracy ± 5% indicated value
• Avilable Model: KM 01 / 03 / 81 / 71

• Single Person Push Button Operation
• High Accuracy ± 5% of Indicated Value in Effective Range
• Scale Length : 80 mm (approx)
• Terminal Voltage : > 85% of Rated Voltage for Insulation Resistance
• Measurement from 10% to 100% of the Insulation Resistance Range
• ABS Resin Yellow Case with Polycarbonate Meter Front Cover
• Meets Requirement of IEC 61010, Installation Category II, 1000 V Phase Earth
• Designed to Generally Confirm to IS 10656-1983
• 7 Models with various Voltage to MOhm Ranges
• Battery Adaptor (Optional) for MC-900BA Series

• Microprocessor controlled with advanced safety features.
• AC Voltage - Live Volage Warning
• Test Voltage (DCV) : 0.5 KV/ 1KV / 2.5 KV / 5 KV
• Bar-graph indicates test voltage-rise & decay can be observed during tests.
• Display and sound warning if external voltage is present
• Auto-ranging / Auto Power-off.
• Battery life is extended by "Enersave™" feature. 
• Built-in carrying case. Test leads in separate pouch. 
• Large LCD Show test time duration (up to 99.9s) for Easy Comparison. 
• IEC 1010-1 CAT III 300V
• IEC 1010-1 CAT.III 300V.