Air Equipments And Spares

• Ultra Slim and lightweight Handy design
• 1000A AC Clamp Meter AC40/400/1000A Auto Range
• Ø33mm Tear Drop Jaw easy to use in tight places
• DMM function ACV, DCV, Ω, Continuity Buzzer
• Fuseless electronic protection on "Ω/Continuity Buzzer" up to 600V
• IEC61010-1 Safety Standard
CAT III 600V (AC A) CAT III 300V / CAT II 600V (AC/DC V)

 2 ranges for selection ( 2 function buttons ) LOW: 50V~1.5kV Press the LOW button, 277 HP is ready for low voltage detection. HIGH: 1.5kV~132kV Press the HIGH button, 277 HP is ready for high voltage detection. • Power consumption: Off: Less than 5uA Low voltage detection mode: Less than 40mA High voltage detection mode: Less than 40mA • Circuit test function Press the Test button to make sure the whole circuit is working well before testing actual high voltage circuits. • Optional accessory: HS-175 Telescopic hot stick (triangle-type) HS-120 Hot stick

This is a pocket-sized 3-5/6-digit Auto-Ranging Digital Clamp Meter. It has stable performance, high precision & reliability, clear reading LCD Display and overload protection. Driven by AAA 1.5V battery, the instrument has large screen Backlit LCD display and it boosts power supply by Auto Power Off Function. The meter is easy to carry and is very popular among users. The instrument’s backlight can be turned on and off automatically after 15 seconds. This meter can be used to measure DC Voltage and AC Voltage, AC Current 600A, Resistance, Capacitance, Diode, Temperature, Continuity Test, Square wave output, Frequency Measurement and has True-RMS Measurement. It is a superior tool and an ideal tool for laboratories, factories, radio enthusiasts and hobbyists

Digital Clamp Meter:
•  Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
•  CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
•  Thus, very useful for power distribution companies, power utilities and maintenance fields.
•  True RMS enables an accurate measurement.
Inc. Accessories:   7066A (Test leads), 9094 (Carrying case), Instruction Manual"

• Measurement of RCD trip time
 Conducting testing of rated residual non-operating currents at
 × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges.
• Measurement of trip out current
 Measuring trip out current by varying current automatically.
• Remote Test
 Enabling a user to hold the Test Leads with his both hands
 by locking the Test Button. Measurement will automatically
 start when the main voltage is detected.
• Voltage Measurement
 Carrying out a constant measurement of voltage in the
 stand-by mode at each Range.

• Measures 4 to 20 mA instrumentation and process signals without breaking the loop
• Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding
• Transfer data to PC via Bluetooth
• Top class measurement 0.2% accuracy
• ∅6mm clamp jaw easy to use in tight places
• LED light for illuminating the measurement spot
• Analog output terminal to allow the connection to a recorder or a digital multimeter

• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.1A resolution
• Accurate reading with True RMS
600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600V

 3-digit measurement display N or S(delayed)
type RCD test, -
AC or A (continuous component detection) Operates on TT neutral and TN system Operating voltage : 230V (Ph/N) – 10/+6% 50/60 H
 Cat III 600V Double insulation IEC 61010-1 IEC 61557-6 NF EN 61557-6 IEC 61236 (EMC) Locking and warning signals for 400V network voltage and contact potentail >50V Operating temperature: -15°C / +45°C Storage temperature: -25°C / +70°C Protection: IP40 Resistance to mechanical shock :1J Weight: 700g Dimensions: W = 92mm, L= 200mm, H = 50mm Power Supply: 6 x 1.5V ‘AA’ batteries

Digital ELCB Tester with Current Rating up to 500mA, TripTest, Fault Trip Time, DC Test, Auto Ramp Test, SelfPowered, verifies wiring connection, 1000mS readout fortesting latest ELCB

Available Output Range: 5kV to 500kV.
Manual / Motorized Type.
AC, DC & AC/DC Combined Options Available.
 Trip MilliAmp Setting Available in Steps of 0.1mA.
Trip MilliAmp Hold Feature Available.
Timer Settable in Up/Down Mode upto 9999 Seconds.
RS485 Modbus Comm.